HK1-8100x100
Genuine HANSEN Coupling Two-Way
Two-Way Shut off, used for Hydraulic Service
  • Available in brass, steel and stainless steel
  • Suitable for liquids, chemicals, steam gasses, vacuum
  • Buna Seals are Standard

2 Way Couplings are most often used for hydraulic application and contain a shut-off valve in each end. Choose from Steel, Brass or Stainless Steel.  You must select a mating Plug of the SAME PIPE Size below to ensure a proper fit.  

Call 800-333-5520 for other HANSEN coupling series.

!
HK Series Sockets

Hansen Sockets Two-Way Shut Off

Choose from Brass or Steel.


Hansen 2-Way couplings are designed to shut off on both ends when disconnected.

For a matched assembly, You must select a plug of the SAME PIPE SIZE below to ensure a proper fit.

HK Series Plugs

Hansen Plugs Two-Way Shut Off

Choose from Brass or Steel

Hansen 2 Way Plugs. For a matched set, select a socket of the SAME PIPE SIZE above. 

To be used with Two-Way Sockets above.

HK Series SS Sockets
Larger picture

Hansen Sockets Two- Way Stainless Steel

For a matched assembly, Select a plug of the SAME PIPE SIZE below

These Hansen Sockets are entirely made from 303 Stainless Steel
HK Series SS Plugs
Larger picture

Hansen Plugs Two-Way Stainless Steel

 

For a matched assembly, Select a Socket of the same pipe size above

 

These Hansen  Plugs are made entirely of 303 Stainless Steel
Flush Face Couplings
FlatFacedCoupling

Hansen Couplings ISO 16028 Flush Face

Flat Faced Couplings
  • Push to connect couplings
  • Minimal fluid loss when disconnecting
  • Minimal air inclusion when connecting
The Hansen  Series FF ia a flat face dry break or minimum spill hydraulic coupling that meets or exceeds the ISO 16028 standard. The series is rated for a 5075 psi (350 bar) operating pressure for all sizes, connected and disconnected. The FF series will be offered in 1/4", 3/8", 1/2", 5/8", 3/4", and 1" body sizes

Note: Sockets and Plugs will only interchage within the same series. Example #10 Socket with #10 Plug